Octo-Vu LCD monitor
8 LCD monitors in a 1U case
Cat 417: 8 screen, PAL/NTSC operation, looping input, 1 U LCD monitor
Murraypro has designed the Octo-Vu for space critical applications, and is ideal where many channels require monitoring simultaneously. Octo-Vu, with its multi-LCD format provides the definitive cost effective solution.
Octo-Vu is the obvious choice for portable mixer, SNG, ENG and compact fly-away kit. Despite their small size, Octo-Vu's LCDs provide excellent picture quality, amazing perceived resolution, with even fine graphics detail being clearly resolved. Remarkably too, there is only modest edge cut-off, so the majority of the picture area is displayed.
Murraypro furnish 8 looping video inputs on the 200mm deep steel cased Octo-Vu. Internal links permitting mixed, high impedance, or 75 ohm operation for each input. Octo-Vu automatically selects colour decoding mode for PAL or NTSC input sources, which can be fed mixed in any order. With the SDI input option, Murraypro's Octo-Vu is ideal for file-server, and input line "presence of signal" monitoring applications in the MCR and CAR environments. Octo-Vu is equipped with a fully regulated internal power supply fed via an IEC mains connector, so no bulky external PSUs to mount! For field use, Octo-Vu may also be dc powered from an external battery.
Tally lamps are provided to clarify operation with vision mixers; these red LEDs may also be interfaced with Murraypro's own "SDI error" logic which gives instant warning of SDI demodulation problems. The front panel of the Octo-Vu may be inclined from the normal, to permit mounting above or below the viewers' eyeline. Octo-Vu units may be stacked, without any ventilation worries, to create display matricies of any height.
.
Off-screen photograph (Click on picture for Hi Res image)
SPECIFICATION
Cat: 417 Octo-Vu
Input impedance: 75 ohm terminating or Hi Z (non-active) looping.
Frequency response: Resolves 2MHz sinewave, & 2T pulse (see grille on Hi-Res photo)
1.8" LCD. 280 x 220 pixels.
Temperature range: Operational 0° to +60°C
Storage only -20° to +80°C
IP d.c. blocking: + 4V maximum, with local 75 ohm termination present.
+ 50V absolute max, with input termination disabled
Power requirement: 24 Watt nominal load. (50 VA max @ 230V 50Hz).
Case: 1U rackmount, 220mm deep to rear panel. 5KG nominal
CE approval: Octo-Vu conforms with EEC marking requirements.
.
