Highly affordable
* Only 2U High. * Approximately 20 Watts * Less than 75mm deep. * 525/625 auto-switching * 16:9 native, 4:3 switchable (960x234). * 2 video IP, front selectable * Universal Power Supply. * Virtually no horizontal cut-off * Fully tiltable LCD panel. * IEC mains input connector * Internal SDI interface available * External 12Volt power option * Clean and bright pictures * Extremely strong steel housing * Whisper quiet fan * Highly affordable * Tally lamps * White LED backlight
- Another world first for Murraypro, . Designed for applications where 16:9 and 4:3 aspect pictures must be monitored with correct geometry, it will also be useful where picture quality is important too. EZ4-3WS is ideal for compact and space limited applications, fitting within a 2U rack envelope and yet it is only 70mm deep.
The small size of the 3.6" LCD screen is deceptive with regard to the quality of the image produced. The LCD's pictures are iminently watchable even for extended periods, as the required pixel inter-polation is performed both cleanly and smoothly, with the image being agreeably bright.
A particularly pleasing feature of the chosen LCD, is the very small amount of horizontal cut-off, and so virtually nothing is lost from the picture displayed.
The EZ4-3WS front panel is equipped with RED Tally lamps, designed for interface with open collector logic, or a normally open contact set. Each LCD's input signal is selectable between dual Composite (CVBS) or CVBS + SDI. Aspect ratio is selectable for 4:3 or 16:9 images
The EZ4-3WS is housed in a steel case, which affords a high level of protection for the monitor. A whisper quiet fan is fitted to ensure that the EZ4-3WS runs cool, even when fitted with the optional SDI input cards, and operated under adverse conditions. Naturally we have also fitted our robust anti-glare protective front window to each LCD, ensuring maximum operational protection.
The versatile EZ4-3WS auto switches between 525 and 625 standards. Supplied with it's internal universal PSU, EZ4-3WS can follow you around the world, ready for instant service anywhere..... adjustment free; requiring at most no more than a change of mains lead!
Options
Optionally: A red/yellow/green multi-colour Tally lamp mode is available.
Optionally: The switched dual BNC inputs, at 75 ohms, may be replaced with a single video input suitable for high-impedance looping. The front panel input selector switch is blanked off.
© Murraypro Sept 2009
